Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Av-65wp74 wiring question    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
cadeB



Joined: 10 Jan 2009
Posts: 1

PostPosted: Sat Jan 10, 2009 3:14 pm    Post subject: Av-65wp74 wiring question Reply with quote

my friend got a new tv and gave me his old Av-65wp74. he had the Convergence board out and all of the wiring removed i have some hooked up but could use some help with the rest. the one that i need help with is hooked in with the wire that is connected to the board where it is labeled conver pb 'y it has 3 tan wires and 4 grey. the other end goes back by the power supply.Any hints on were this would go...... thanks cade
Google

PostPost subject: Advertisement

Jesse Mack



Joined: 22 May 2008
Posts: 600
Location: The Last Frontier

PostPosted: Mon Jan 12, 2009 12:02 pm    Post subject: Reply with quote

The Y connector harness goes to the CN00Y connector. It is on the top of the module that is completely incased in metal shielding and standing up as a daughter board of the main chassis.

Hope this helps

Jesse
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Privacy Policy       Copyright © 2020 RiddledTV.com       Advertise on RiddedTV.com