Riddled TV Repair Forum
Service Menu and Manual Schematics
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Pioneer Model PDP-435PE Stuck on Standby Mode    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
Author Message

Joined: 27 Sep 2014
Posts: 1
Location: United Kingdom

PostPosted: Sat Sep 27, 2014 4:00 am    Post subject: Pioneer Model PDP-435PE Stuck on Standby Mode Reply with quote

Hi All,

Just registered as I cannae figure out how to fix my tv.

I have a 43" pioneer, model PDP-435PE, with a media receiver model PDP-R05FE (I'll call this box for short).

When I switch on at the mains it goes into standby, solid red light on both the box and the tv and remains unresponsive to my remote.

I've checked the battery in the remote. Also, I've switched the whole thing off and left it for a while, turned it back on, still the same problem.

I've heard there's a trap switch for pioneer tvs, does this problem sound like I've triggered it, and if so how would I reset it?

Any help would be appreciated! Thanks in advance Smile

PostPost subject: Advertisement

Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Privacy Policy       Copyright © 2020 RiddledTV.com       Advertise on RiddedTV.com