Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Sylvania LC320SS9 Was dead now blinking power light    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
Inkedivxx



Joined: 05 Aug 2009
Posts: 39
Location: Myrtle Beach SC

PostPosted: Wed Sep 23, 2009 12:07 pm    Post subject: Sylvania LC320SS9 Was dead now blinking power light Reply with quote

I am working on a set that had a bad digital board in it. I replaced the digital board, 1ESA17241. Before replacing the digital board, I had a stand-by light, but the set would not power up. Now, I have a power up sound, and 13 blinks of the power light. Any ideas of where to go next? I have the manual, my voltages look good, I am missing something.....
Google

PostPost subject: Advertisement

curt wolfe



Joined: 24 Feb 2009
Posts: 51

PostPosted: Fri Sep 25, 2009 4:23 pm    Post subject: Reply with quote

would check all the transformers on the inverter board. they should all be in the 517 ohm range
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Privacy Policy       Copyright © 2020 RiddledTV.com       Advertise on RiddedTV.com