RiddledTV.com



Jamma (and other) PCB Adapters for Sale

 
All prices include FREE SHIPPING within the USA.
Email Arcades@RiddledTV.com with questions or for other shipping quotes.

Enhance!
2 to 3 Button Jamma Adapter-2 Player:
$39 USD Ships in 3 days
- Plug and play, no cutting or splicing of wires required
- Button 3 is activated by pressing buttons 1 and 2 simultaneously
- Supports players 1 and 2
- NOTE: Please tell me if using this with a switcher, I need to modify it prior to shipping

Enhance!
2 to 3 Button Jamma Adapter-4 Player Konami:
$49 USD Ships in 3 days
- Ideal for games like X-men, Bucky O-Hare, and similar 3 button games
- Plug and play, no cutting or splicing of wires required
- Button 3 is activated by pressing buttons 1 and 2 simultaneously
- Supports 4 players with pinouts for the Konami 4-Player cabinets
- NOTE: Please tell me if using this with a switcher, I need to modify it prior to shipping
- 3ft cables available for $5ea to support players 3 and 4 connections to gameboard/condenser
- Requires Player 3 and 4 control panel harnesses with Konami pinout (not included)

Enhance!
2 to 3 Button Jamma Adapter-4 Player Midway:
$49 USD Ships in 3 days
- Ideal for games like NBA Jam, NHL Open Ice, and NFL Blitz with 8way joysticks
- Plug and play, no cutting or splicing of wires required
- Button 3 is activated by pressing buttons 1 and 2 simultaneously
- Supports 4 players with pinouts for the Midway 4-Player cabinets
- NOTE: Please tell me if using this with a switcher, I need to modify it prior to shipping
- 3ft cables available for $5ea to support players 3 and 4 connections to gameboard/condenser
- Requires Player 3 and 4 control panel harnesses with Midway pinout (not included)

Enhance!
Jamma Signal Regenerator:
$39 USD In Stock, Ready to ship immediately
- Takes poor input signals and regenerates strong ones
- High impedance output to all button inputs in normal state (looks like an open button switch)
- Any button signal below 1.4V is LOW, and outputs strong, low impedance signal to gameboard
- Provides pull up resistors for all inputs, so it isolates many problems with defective gameboards
- Less than 10ns of delay added to all inputs.

Enhance!
Konami Board to Jamma Harness Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug your Konami game Board into your Jamma-wired arcade cabinet
- Works with any Konami game that uses the standard 36pin connector
- Enable or Disable -5V power as needed via Jumper connector

Enhance!
Konami Harness to Jamma Board Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug your Jamma Board into your Konami-wired arcade cabinet
- Works with any standard Jamma gameboard
- Enable or Disable -5V power as needed via Jumper connector

Enhance!
Pacman PCB to Jamma Harness Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug an original Pac-man or Ms. Pacman gameboard into your Jamma-wired arcade cabinet
- Allows Pac-man to operate using your Jamma-connected Power Supply
- Works with Original Pac-man, Ms. Pacman, and Pacman Plus PCBs

Enhance!
Pacman Switching Power Supply Adapter:
$25 USD In Stock, Ready to ship immediately
- Use a newer, more reliable power supply with your original Pac-man or Ms. Pacman gameboard
- Just insert this adapter between your pacman wire harness and pacman gameboard
- Requires 12V and 5V from power supply.
- Works with Original Pac-man, Ms. Pacman, and Pacman Plus PCBs
- Wire harness is not included.

Enhance!
Pandora Box to Jamma Harness Adapter:
$29 USD In Stock, Ready to ship
- Plug your Elf, Pandora Box,2,3,4, or similar into your Jamma arcade Cabinet
- These boards use a non-standard 6 button inputs on the Jamma harness
- This adapter breaks out buttons 4,5,6 from Pandora Box to traditional kick harness headers
- It also provides a ground on Jamma pins 27,e which fixes the "no controls work" issue
- Choose from Multiple Kick Harness configurations:
  - No Kick harness
  - Mortal Kombat 1
  - Mortal Kombat 2,3,4
  - Killer Instinct (all versions)
  - CPS1

Enhance!
Pleiades/Phoenix Board to Jamma Harness Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug your Pleiades/Phoenix Board into your Jamma-wired arcade cabinet

Enhance!
Pleiades/Phoenix Harness to Jamma Board Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug your Jamma Board into your Pleiades/Phoenix-wired arcade cabinet

Enhance!
Orca Crazy Kong Board to Jamma Harness:
$25 USD In Stock, Ready to ship immediately
- This game uses a very specific pinout, different from many Orca boards
- Please verify your board's pinout matches before purchase
- Pinout here



Enhance!
Track & Field board to Jamma Harness:
$25 USD In Stock, Ready to ship immediately
- Works with Konami Track & Field, Hypersports Boards
- Maps Run1 to Jamma btn 1 for Players1&2
- Maps Jump/Throw to Jamma btn 2 for Players1&2
- Maps Run2 to Jamma btn 3 for Players1&2
- P3Start = P1Up, P4Start = P2Up
- Provides breakouts for 4player controls

Enhance!
Zaxxon Board to Jamma Harness Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug your Zaxxon Board into your Jamma-wired arcade cabinet
- Works with: Zaxxon, Super Zaxxon, Future Spy, and Congo Bongo gameboards

Enhance!
Zaxxon Harness to Jamma Board Adapter:
$25 USD In Stock, Ready to ship immediately
- Plug your Jamma Board into your Zaxxon-wired arcade cabinet
- Works with any standard Jamma gameboard
- Also works with: Super Zaxxon, Future Spy, and Congo Bongo harnesses