All prices include FREE SHIPPING within the USA.
Email Arcades@RiddledTV.com with questions or for other shipping quotes.
|
Enhance!
|
Jamma Signal Regenerator:
$39 USD Assembled upon order, ships within 1 week
- Takes poor input signals and regenerates strong ones
- High impedance output to all button inputs in normal state (looks like an open button switch)
- Any button signal below 1.4V is LOW, and outputs strong, low impedance signal to gameboard
- Provides pull up resistors for all inputs, so it isolates many problems with defective gameboards
- Less than 10ns of delay added to all inputs.
|
Enhance!
|
Konami Board to Jamma Harness Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug your Konami game Board into your Jamma-wired arcade cabinet
- Works with any Konami game that uses the standard 36pin connector
- Enable or Disable -5V power as needed via Jumper connector
|
Enhance!
|
Konami Harness to Jamma Board Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug your Jamma Board into your Konami-wired arcade cabinet
- Works with any standard Jamma gameboard
- Enable or Disable -5V power as needed via Jumper connector
|
Enhance!
|
Pacman PCB to Jamma Harness Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug an original Pac-man or Ms. Pacman gameboard into your Jamma-wired arcade cabinet
- Allows Pac-man to operate using your Jamma-connected Power Supply
- Works with Original Pac-man, Ms. Pacman, and Pacman Plus PCBs
|
Enhance!
|
Pacman Switching Power Supply Adapter:
$29 USD In Stock, Ready to ship immediately
- Use a newer, more reliable power supply with your original Pac-man or Ms. Pacman gameboard
- Just insert this adapter between your pacman wire harness and pacman gameboard
- Requires 12V and 5V from power supply.
- Works with Original Pac-man, Ms. Pacman, and Pacman Plus PCBs
- Wire harness is not included.
|
Enhance!
|
Pandora Box to Jamma Harness Adapter:
$29 USD In Stock, Ready to ship
- Plug your Elf, Pandora Box,2,3,4, or similar into your Jamma arcade Cabinet
- These boards use a non-standard 6 button inputs on the Jamma harness
- This adapter breaks out buttons 4,5,6 from Pandora Box to traditional kick harness headers
- It also provides a ground on Jamma pins 27,e which fixes the "no controls work" issue
- Choose from Multiple Kick Harness configurations:
- No Kick harness
- Mortal Kombat 1
- Mortal Kombat 2,3,4
- Killer Instinct (all versions)
- CPS1
|
Enhance!
|
Pleiades/Phoenix Board to Jamma Harness Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug your Pleiades/Phoenix Board into your Jamma-wired arcade cabinet
|
Enhance!
|
Pleiades/Phoenix Harness to Jamma Board Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug your Jamma Board into your Pleiades/Phoenix-wired arcade cabinet
|
Enhance!
|
Orca Crazy Kong Board to Jamma Harness:
$29 USD In Stock, Ready to ship immediately
- This game uses a very specific pinout, different from many Orca boards
- Please verify your board's pinout matches before purchase
- Pinout here
|
Enhance!
|
Track & Field board to Jamma Harness:
$29 USD In Stock, Ready to ship immediately
- Works with Konami Track & Field, Hypersports Boards
- Maps Run1 to Jamma btn 1 for Players1&2
- Maps Jump/Throw to Jamma btn 2 for Players1&2
- Maps Run2 to Jamma btn 3 for Players1&2
- P3Start = P1Up, P4Start = P2Up
- Provides breakouts for 4player controls
|
Enhance!
|
Zaxxon Board to Jamma Harness Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug your Zaxxon Board into your Jamma-wired arcade cabinet
- Works with: Zaxxon, Super Zaxxon, Future Spy, and Congo Bongo gameboards
|
Enhance!
|
Zaxxon Harness to Jamma Board Adapter:
$29 USD In Stock, Ready to ship immediately
- Plug your Jamma Board into your Zaxxon-wired arcade cabinet
- Works with any standard Jamma gameboard
- Also works with: Super Zaxxon, Future Spy, and Congo Bongo harnesses
|
|
