All prices include FREE SHIPPING within the USA.
Email Arcades@RiddledTV.com with questions or for other shipping quotes.
|
Enhance!
|
Jamma Single Board 6-Way Switcher - Designed by RiddledTV
$120 USD
Backordered, Estimated to ship in 4 weeks
- Please consider a 4-Way or 8-Way EZ Switcher as an alternative
- Switched 5V, 12V, and -5V Power to each gameboard
- No goofy remotes, change games by holding P1 and P2 Start buttons
- Up to 5 button inputs per player
- *New* Save State - Remembers last board active on power up
- Installation Guide (pdf)
- Game Switch Inputs Connection Diagram (pdf)
- If you need Jamma Extensions, consider using the EZ Switcher products instead
|
Enhance!
|
2-Way Jamma Switcher - Designed by RiddledTV
$69 USD
In Stock, Ships Immediately
- Fully Switched 5V, 12V, and -5V Power to each gameboard
- Change games by holding P1 and P2 Start buttons
- Up to 5 button inputs per player, modifiable for 6 buttons
- Connection Diagram (pdf)
- Installation Guide (pdf)
- Game Switch Inputs Connection Diagram (pdf)
- If you need Jamma Extensions, consider using the 2way EZ Switcher instead
|
Enhance!
|
2Way Jamma EZ Switcher - Designed by RiddledTV
$99 USD In Stock, Ships Immediately
- Switches 2 gameboards, Local Jamma + Remote (anything)
- No Jamma Extensions needed, comes with 3ft of cables
- Includes 1 EZ Jamma Gameboard Interface and cables
- Only 1 board powered at a time
- Change games by holding P1 and P2 Start buttons
- Supports Stereo Sound via Jamma or 4pin header
- Remote board can use any EZ Gameboard Interfaces
- Includes 18awg power cable, or upgrade to 14awg for +$10
- Installation Manual (pdf)
- Game Switch Inputs Connection Diagram (pdf)
|
Enhance!
|
3ft EZ Jamma Extension - Designed by RiddledTV
$35 USD
In Stock, Ships immediately
- Combines EZ Jamma Cabinet Interface + EZ Jamma GBI
- Supports up to 5 buttons per player
- (Can support 6 buttons by removing 2 solder jumpers)
- includes 6pin 18AWG Power cable
- includes 3ft of ribbon cable
- optional: swap for 14AWG Power Cable
|
Enhance!
|
Konami 2-Way Switcher - Designed by RiddledTV
$100 USD In Stock, Ships immediately
- Switched 5V, 12V, and -5V Power to each gameboard
- Works for Konami games with the Konami Classic pinouts
- Change games by holding P1 and P2 Start buttons
- Installation Guide (pdf)
- Game Switch Inputs Connection Diagram (pdf)
|
Enhance!
|
Track & Field 2-Way EZ Switcher - Designed by RiddledTV
$100 USD In Stock. Ships Immediately
- Switches between two Track & Field or Hyper Sports boards
- Switched 5V and 12V Power to each gameboard
- Includes remote board and cables
- Change games by holding P1 and P2 Start buttons
- *New* supports other EZ interfaces, like Jamma ('88 Games)
- Installation Guide (pdf)
- Game Switch Inputs Connection Diagram (pdf)
|
Enhance!
|
Nintendo 2-Way Switcher - Designed by RiddledTV
$100 USD Assembled upon order, ships in ~1 wk
- Switched 5V, 12V, and -5V Power to each gameboard
- Note: This switcher requires 12V from the harness in order to operate.
- Works for Donkey Kong, Donkey Kong Jr, DK 3, Mario Bro. Popeye
- Change games by holding P1 and P2 Start buttons
- Installation Guide (pdf)
- Demonstration Video
- Nintendo Card Edge Adapter (+$25)
|
Enhance!
|
Auxiliary Relay Board - Designed by RiddledTV
$65 USD In stock, Ships immediately
- Add-on board to RiddledTV switchers to provide 4 switched inputs
- Works with RiddledTV 6way Jamma, or 4way and 8way EZ switchers
- Switches any 4 inputs including Audio, Optical Guns, Voltage and Ground connections
- Includes a 3-ft 6pin cable to connect to the Switcher
- 6 status LEDs indicate which board is currently active
- Installation Guide (pdf)
|
Enhance!
|
PunchOut and Playchoice 2-Way Switcher - Designed by RiddledTV
$125 USD Assembled upon order, ships in 3 weeks
- Note: Previous issues with faint cross-monitor ghosting has been resolved with this design
- Designed for Nintendo Dual Monitor game boards
- Switched Power to each gameboard
- Works with PunchOut, Super PunchOut, and Arm Wrestling
- Upgrade to support Dual Monitor Playchoice gameboards
- Change games by holding KO and Left Punch (Or Game Sel, Start) buttons
- Installation Guide (pdf)
|
Enhance!
|
Outrun 2-Way Switcher - Designed by RiddledTV
$200 USD Out of Stock, Check back Soon
- Designed to support 2 different Sega Outrun gameboards
- Works with any Outrun and Turbo Outrun romsets
- Switched Power to each gameboard
- Only 1 gameboard powered at a time
- Change games by holding Service button or use a button of your choice
- Installation Guide (pdf)
- Video Demonstration
- Photo of Gameboard Interface
|
|